Description
SEN-HZ21WD
Products Description:
SEN-HZ21WD water flow sensor, G1/2 teeth, one word structure, size: 82 * 50 * 38 mm, The length of the outer end of the water inlet is 33mm, and the length of the outer end of the water outlet is 12mm, which is provided with a fixed pin hole, an elliptical hole with a large diameter of 6mm, a central hole spacing of 33mm, and a temperature sensor probe hole,Waterproof explosion-proof, heat and cold resistance. the pulse signal output,can be used for water flow switch, also can be used to measure flow rate at the same time,have two flow range.If you want to increase the temperature control ,you can add heat sensitive resistor, the output line is green, but also can be connected to the other two special line to control temperature.
Application:
Gas water heaters, electric water heater, washing machine, water machine, boiler, electromagnetic water heater, water control (integrated) machine, water machine, heat pump hot water engineering, the card management system of intelligent water meter, water meter, IC campus card sale water system, self sale (sell) water machine, water treatment water distribution equipment, dispensing equipment, cooling system, circulation system, intelligent heating equipment, mechanical equipment, instrumentation, pharmaceutical (agents) equipment etc..
Technical Parameter:
| Temperature | water ≤ 60°C |
| Operating Voltage Range | DC4.5-18V Could be Customized 24V |
| Withstand Hydraulic Pressure | ≤ 1.75MPa |
| Material Grade | Copper |
| Flow Range | 1-30L/min |
| Rated Voltage/Current | DC5V ≤ 10mA |
| Connection | Three lines,red for positive,black for negative,yellow for pulse signal |
| Electrical Strength | AC500V,50HZ |
| Customization | The length of connection and the type of the connection terminal. |
