Description
Crystal Oscillators
| Output Logic /Waveform | Product Series | Product Description | Available Frequency Range |
| CMOS | HB | Programmable clocks for quick-turn | 1.0 ~ 200.0 MHz |
| CML | HQJF | High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical | |
| CMOS | HA | ● HAxx series features AT-cut crystal for it’s high frequency stability while enjoys uA low currentconsumption that would normally only available from X-cut tuning forl crystal . ● 32.768 KHz is popular for Real Time Clock and other timing applications . ● For even tighter frequency stability ( ± 5 ppm over -40 to 85 °C ) and lower current consumption ( 1.2 uA at 3.3V ) , please contact Mercury . |
|
| HCTQF | Quick Turn Dual output Oscillators. 10~245MHz 1.5ps(typical) | ||
| HJ | ●Mercury’s HJ Series is an ultra low phase noise crystal clock oscillator providing a much better phase noise & jitter performance, compared to standard clocks . ● With an output frequency of 49.152MHz, the phase noise jitter is 48 fsec (RMS, 12 KHz to 20 MHz) with a supply voltage (VDD) of +3.3V applied |
||
| HK | Ultra Low Current clocks. 2.7 mA for 50 MHz at 1.8V. And 5 mA at 3.3V | ||
| HM | EMI Reducion Spread Spectrum Clocks (SSXOs) | ||
| HN | Wide Operating Temperature range from -55 °C to +125 °C | ||
| HTQF | Quick-Turn clock oscillators. 10~245MHz. 0.6ps(typical) | ||
| HTQN | Quick-Turn clock oscillators. 10~245MHz. 1.0ps(typical) | ||
| H， SWO | General purpose clocks. Low cost, Excellent phase noise and jitter, High performance | 20.0 KHz ~ 160.0 MHz | |
| HCSL | HCJF | High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical | |
| HCK | ●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz. | 13.5 ~ 200.0 MHz | |
| LVDS | HCDQF | Quick Turn Dual output Oscillators. 10~1450MHz 1.5ps(typical) | 10 ~ 1450 MHz |
| HDF | Uses a High-Q fundamental crystal and a low jitter multiplier | 38 ~ 640 MHz | |
| HDJF | High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical | 150~2100MHz | |
| HDK | ●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz. | 13.5 ~ 200.0 MHz | |
| HDQF | Quick-Turn clock oscillators. 10~1450MHz. 0.6ps(typical) | 10 ~ 1450 MHz | |
| HDQN | Quick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical) | 10 ~ 1450 MHz | |
| LVPECL | HCPQF | Quick Turn Dual output Oscillators. 10~1450MHz 1.5ps(typical) | 10 ~ 1450 MHz |
| HPF | Uses a High-Q fundamental crystal and a low jitter multiplier | 38 ~ 640 MHz | |
| HPJF | High Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical | 150~2100MHz | |
| HPK | ●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz. | 13.5 ~ 200.0 MHz | |
| HPQF | Quick-Turn clock oscillators. 10~1450MHz. 0.6ps(typical) | 10 ~ 1450 MHz | |
| HPQN | Quick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical) | 10 ~ 1450 MHz | |
| True Sine | HS | 50 ohms load. Multiplier is used for 55+ MHz | 10.0 ~ 800.0 MHz |
| HSR | 10K ohm // 10 pF. No multiplier | 10.0 ~ 52.0 MHz |
